Adhesives Wax

In hot melt adhesives, wax is the most effective regulator of adhesive properties. The main function of the wax is to reduce the melting point and viscosity of the hot melt adhesive, improve the fluidity and wettability of the glue, improve the bonding strength, prevent the hot melt adhesive agglomeration, and reduce the cost.

In the polyurethane and polyamide hot melt adhesives, there is no addition of wax. The other hot melt adhesives are composed of certain wax. However, if the amount is too much, the shrinkage of the adhesive becomes large, and the bonding strength is rather lowered. Therefore, in order to achieve a large bonding strength, the amount of the wax should be controlled. 

Commonly used waxes are:

Alkane paraffin wax

the melting point 50-70 ° C, molecular weight 280-560. In corrugated board manufacturing, corrugated box molding, paper bag manufacturing and book binding,  paraffin wax are well applied in the EVA based hot melt adhesives and adjust the setting time;

Microcrystalline paraffin

the melting point of microcrystalline paraffin 65-105 ° C, molecular weight 450-700, higher price, improve the flexibility, bonding strength, thermal stability and cold resistance of hot melt adhesives than alkane paraffin, but the anti-caking ability is lower than Alkane paraffin;

PE wax

has the good compatibility with ethylene/vinyl acetate copolymers and other hot melt adhesives. PE wax melting point is high. It also has high hardness and can reduce the viscosity of the adhesive composition;

Fischer-Tropsch wax

has the linear molecular structure with high melting point and low penetration. It has narrow melting range and good weather resistance. Therefore, it is widely used in applications requiring good weather resistance, high temperature and quick solidification.

Popular King Honor Wax

KHWAX QP115H

KH FT WAX 85

KH Paraffin Wax 70H

KH Paraffin Wax F66N/L/H

Other King Honor Wax Applications

Rubber

Woods

Bitumen