KING HONOR INTERNATIONAL LTD.
KH FT Wax 105

  • KH FT Wax 105

    APPLICATION

    News

    • The Role of Polyethylene Wax Powder The Role of Polyethylene Wax Powder

      Polyethylene wax powder is a low molecular weight polyethylene homopolymer or copolymer that is widely used in coatings. The so-called wax means that the polymer is distributed in the form of crystall...

    KH FT Wax 105
    • Features:


      • High melting point
      • High stability
      • Low Viscosity
      • Low oil content
      • Good hardness


    • Application:

      • In PVC processing as the lubricants
      • Hot melt adhesives
      • Master batches
      • Rubber industries
      • Pigment and coating
      • Polishes

    The Fischer-Tropsch Waxes are made from carbon monoxide and hydrogen in the presence of the selected catalyst. Generally, the feedstock is produced from coal or natural gas. The final synthetic waxes tend to be the saturated, straight-chain hydrocarbons. Their very linear molecular structure results in high melting points, low viscosity, and good hardness.

    In PVC processing. Fischer-Tropsch synthetic wax is mainly used as an external lubricant. It has the relative molecular mass of 500-1000. Since, compared to PE wax, Fischer-Tropsch wax has a low molecular weight, low melt viscosity, high melting point, and narrow melting range,  the same lubrication effect can be achieved with less dosage and reduce the negative impact of lubricant on the physical and mechanical properties of the PVC products. On adjustment of internal and external lubrication, it has the irreplaceable advantage than PE wax.

    KH FT Wax 105 use the feedstock from coal, They have the fine crystal structure and narrow carbon distribution. Its low viscosity increases the production speed and fluidity of the PVC product. Besides, it can contribute to the dispersion of the pigment and other fillers. KH FT wax 105 can reduce the dosage by about 15%-50% compared to paraffin wax and PE wax.

    In the processing and production of a masterbatch, KH FT wax 105  can effectively wet and penetrate into the pores of the agglomerated particles to coat the surface of the pigment, and better disperse the pigment aggregate under the action of the shearing force to effectively prevent re-agglomeration


    Items

    Test method

    Standard

    Typical Data

    Viscosity,cps@1 40℃

    Brookfield

    10-25

    10.6

    Drop point, ℃

    ASTM D3954-94(2004)


    102-103

    Penetration,0.1mm/100g, 5s at 25℃

    ASTM D1321-2010

    2-8

    3

    Acid No, mg KOH/g

    ASTM D-1386


    0.35

    Oil content%

    ASTM D721-2006

    <0.2

    0.15

    Color, Saybolt

    Gardner  color


    1


    Our KH FT WAX 105 is complied with:

    FDA 21CFR175.105(Hot Melt Adhesives Additives)

    If you had other FDA requirements, please contact us :  info@khonorwax.com

    Supplying Form

    Form

    25KGS PE Bag /

    25KGS Carton

    50KGS PP bag

    Iso tank

    Paper Bag

    Powder(16,20,40mesh)

    *




    Slab


     

     


    Liquid




    *

    Storage

    Please store products in a cool, dry location, away from sources of intense heat, incompatible materials, water, heat, and flame.
    Long-distance transportation or hot atmosphere may have cracked, that does not affect the quality of products.
top
  • CUSTOMER SERVICE
  • +86-411-81822086
  • ADD
  • Room 603, Tower A Shangdu Building, Shahekou District, Dalian 116021, China
  • +86-411-81822086
  • info@khonorwax.com
  • Room 603, Tower A Shangdu Building, Shahekou District, Dalian 116021, China