KING HONOR INTERNATIONAL LTD.
Paraffin Emulsion Used in Leather Industry

Paraffin Emulsion Used in Leather Industry Paraffin Emulsion Used in Leather Industry 2019/06/07

(1)paraffin emulsion can be combined with fatliquoring agent.

The addition of a small amount of paraffin emulsion in the fatliquoring agent can improve the effect of fatliquoring agent. Paraffin wax emulsion manufacturers proved that the addition of 1% to 5% wax emulsion to leather fatliquoring agent can improve the filling performance of fatliquoring agent, improve the permeability of fatliquoring agent in leather fiber, increase the waterproof property of leather, make leather feel smooth, soft and plump.

(2) paraffin emulsion is used as an additive in leather finishing.

The paraffin emulsion added to the leather finishing agent mainly plays the role of filling coating, improving coating feel, wear-resisting, and increasing luster.

In the early stage, emulsified wax was prepared mainly from beeswax, palm wax, insect wax, white wax, and montane wax. The output of these waxes is limited and the price is high. In recent years, paraffin wax has been used as the main raw material to prepare wax emulsion for leather. Paraffin wax as the main raw material can greatly reduce the price of wax emulsion, and the effect is not worse than that of natural wax. They are the main additives for finishing high-grade leather, which can give the leather special brightness and wax feel.
They can be divided into soft wax and hard wax from their uses. They are used in the bottom, middle and top coatings of leather, respectively. The ionic properties of the emulsion can be divided into non-ionic, anionic and cationic wax emulsions, which can be compatible with different ionic finishing agents. The emulsion form or solid emulsified wax can be made from the dosage form.

All products have good water solubility, stable emulsion, long-term storage, no lamination, and no floating wax. Applicable to all kinds of leather finishing, finishing after the leather soft and natural luster, feel full of moisture, can improve the leather surface friction resistant ability.

(3) paraffin emulsion is used as a leather brightener, matting agent and hand feeling agent.

At present, there are two kinds of requirements for the appearance of leather products. One is to increase the gloss of leather, such as polishing leather, lacquer leather, polishing effect leather, etc. The other is not to gloss, so that leather presents a sense of genuine leather, natural beauty. The former needs a brightener, the latter needs a matting agent. When using different wax emulsions for leather top coating, some can increase the gloss or brightness of the leather, and some can produce a matting effect. The size of wax emulsion with the light effect is very small and the composition is relatively simple. They form a homogeneous and continuous wax film on the surface of leather. The film is very smooth on the micro-scale, which has a strong reflection on light waves and thus has a glossy feeling. The wax emulsion has a large particle size, forming a heterogeneous and uneven surface on the surface of the leather, resulting in strong scattering effect on the light wave. Scattering is the fundamental reason for the extinction effect of extinction agents.

KING HONOR INTERNATIONAL Ltd. is a paraffin wax emulsion manufacturer. Welcome to inquire.





Related News
  • Paraffin Wax Will Increase Again

    Paraffin Wax Will Increase Again

    August 24, 2018Chinee paraffin wax market run steady. It is understood that the current refineries have no inventory pressure. At present, buying are more active. Considering that the market resources are n...view
  • Production Status of Microcrystalline Wax in China

    Production Status of Microcrystalline Wax in China

    May 24, 2019Microcrystalline wax has special physical and chemical properties and is widely used in grease thickening, paraffin modification, daily chemical industry, papermaking industry and food industry. There...view
  • Performance Characteristics Comparison of HDPE 7000F

    Performance Characteristics Comparison of HDPE 7000F

    April 30, 2019Compared with LDPE, HDPE 7000F has high density, high crystallinity, high-temperature resistance, oil resistance, and high strength. However, due to the high viscosity of the melt, it is difficult to ...view
  • Use of Paraffin with Different Melting Points

    Use of Paraffin with Different Melting Points

    May 8, 2019High melt point - high melt wax is very suitable for making cylindrical candles, hand-dipped fine candles, moulded candles, moulded or carved gift candles. High melt wax is very hard and cannot retain...view
  • US Tariff Memo

    US Tariff Memo

    August 24, 2018At 0:50 on 23rd Mar, Beijing time, US President Trump formally signed tariff memo of trade to China at the White House, which would probably impose tariffs on 60 billion US dollars in China's...view
  • What Are the Precautions in the Transportation of Microcrystalline Wax?

    What Are the Precautions in the Transportation of Microcrystalline Wax?

    July 24, 2019Microcrystalline waxes are typically packaged in bags or cartons. In the summer, pay attention to its cooling work under high temperature to prevent spontaneous overheating caused by overheating. The...view
  • CUSTOMER SERVICE
  • +86-411-81822086
  • ADD
  • Room 603, Tower A Shangdu Building, Shahekou District, Dalian 116021, China
  • +86-411-81822086
  • info@khonorwax.com
  • Room 603, Tower A Shangdu Building, Shahekou District, Dalian 116021, China