KING HONOR INTERNATIONAL LTD.
How to Distinguish the Quality of Micronized Polyethylene Wax?

How to Distinguish the Quality of Micronized Polyethylene Wax? How to Distinguish the Quality of Micronized Polyethylene Wax? 2019/08/23

Micronized polyethylene wax can play the role of lubrication, demoulding, brightening, plasticizing, anti-oxidation, anti-pollution and anti-adhesion during use. In recent years, manufacturers of micronized polyethylene wax on the market have sprung up, the quality is also uneven, and there is a phenomenon of adulteration. We must carefully identify when purchasing.  The method of identification is summarized as: look, hold, test, test.

The genuine micronized polyethylene wax is translucent and has good gloss, like plastic. It is lubricated by hand, but it is not greasy. There are many test methods and the test environment has an effect, but the softening point of the really micronized polyethylene wax is higher than 100 °C.  Second, we must pay attention to the price. The high price is not necessarily a good one. If the price is low, we must be careful to buy fakes. Therefore, if you want to be satisfied with the micronized polyethylene wax, you still have to try it yourself.

The polyethylene wax powder produced by KING HONOR INTERNATIONAL can effectively improve the fluidity of PVC heat stabilizer processing, increase the extrusion efficiency of PVC products, and improve the surface gloss of products; it can effectively control the agglomeration phenomenon of PVC heat stabilizer processing process and effectively solve the appearance of the process of PVC heat stabilizer processing products.
Related News
  • The Use of Paraffin Wax

    The Use of Paraffin Wax

    July 24, 2019Paraffin wax is a kind of mineral wax and also a kind of petroleum wax. It is a flake or needle crystal obtained by solvent refining, solvent dewaxing or wax freezing crystallization, solvent dewaxing...view
  • Brief Application Comparison of Wax Powder

    Brief Application Comparison of Wax Powder

    May 8, 2019Micronized wax powderCharacterizationOutside view: white powderDensity: 0.93gMelting point: 120 CAverage particle size: 5umCharacteristic:1. Ultrafine modified micronized wax powder provides excellent...view
  • Application of Pe Wax Emulsion in Waterborne Coatings

    Application of Pe Wax Emulsion in Waterborne Coatings

    July 24, 2019Adding emulsifier to polyethylene wax to make pe wax emulsion, adding it to acrylic resin, it can improve its hydrophilicity to some extent, and it can play the role of anti-slip, anti-blocking and st...view
  • ​Physical Properties and Main Classification of Paraffin

    ​Physical Properties and Main Classification of Paraffin

    January 3, 2020Paraffin wax, also known as crystalline wax, is usually a white, tasteless wax-like solid. It melts at 47 ° C-64 ° C, with a density of about 0.9g/cm3.view
  • Catalytic Pyrolysis of Fischer-Tropsch Wax

    Catalytic Pyrolysis of Fischer-Tropsch Wax

    April 19, 2019Fischer-Tropsch wax is a methylene polymer, an alkane polymer synthesized from hydrocarbon-based syngas or natural gas. It mainly relies on low-cost raw materials of coal chemical industry for iron-ba...view
  • A Brief Introduction to Fully Defined Paraffin Wax Manufacturers

    A Brief Introduction to Fully Defined Paraffin Wax Manufacturers

    January 3, 2020Fully refined paraffin wax manufacturers refer to the products obtained from oil-bearing wax as raw material, through sweating or solvent deoiling, and then through clay or hydrofining.view
  • CUSTOMER SERVICE
  • +86-411-81822086
  • ADD
  • Room 603, Tower A Shangdu Building, Shahekou District, Dalian 116021, China
  • +86-411-81822086
  • info@khonorwax.com
  • Room 603, Tower A Shangdu Building, Shahekou District, Dalian 116021, China